Standard pressure gauges and thermometers generally cope with ambient temperatures down to -40 �C. But what should be the features of a mechanical measuring instrument that works perfectly well in polar climates with even lower temperatures? This can be explained using the WIKA POLARgauge� for example. This product family has been designed designed for measurement at extremely low ambient temperatures right down to -70 �C. The instruments are mainly utilized in crude oil and natural gas processing; for example, in the local pressure and temperature tabs on pumping stations and pipelines.
Minus 40 �C ? this value is frequently exceeded faster than one thinks. That is demonstrated with a turn to Russia. There, tables with standard temperature values even indicate more than -60 �C for a few regions. For mechanical instruments which will be operated in such ambient conditions, two critical points should be observed:
For pressure measurement at extremely low ambient temperatures only available with filled case: The WIKA pressure gauge model PG23LT.
1. The case filling
A measurement at extremely low ambient temperatures requires filled-filled measuring instruments. The liquids useful for this protect the instrument from condensation formation within the case resulting from temperature fluctuations. They thus avoid the window from frosting, so that the measured value can be read safely.
However, the majority of silicone oils used for this purpose commence to solidify at temperatures below -40 �C. The movement then no more works, or can even freeze. Application-aligned monitoring of the parameters (e.g. process pressure) can’t be ensured.
Therefore, for the POLARgauge� series a particular low-temperature silicone oil has been specified. This oil remains in a state that allows correct measurement and measured value display, even at -70 �C.
The case of the POLARgauge� model PG23LT (r.) in comparison to a typical version (l.): It does not have any elastomers.
2. The elastomers
Elastomers are found in all mechanical pressure gauges or thermometers. They provide a secure sealing between your individual components. In detail, they are the flat gasket at the window, and with pressure gauges additionally the blow-out device on the trunk of the case and the vent valve for pressure compensation.
However, the sealing materials found in standard designs cannot durably withstand suprisingly low ambient temperatures. They become brittle over time and lose their sealing properties. This results in the event filling escaping. This, in turn, leads to the formation of condensation and the frosting of the window.
Therefore, in the development of the POLARgauge� series, elastomers have been eliminated in every critical points. The seal between your window and case is constructed of a special material. It is adapted to extremely low ambient temperatures. The vent valve has a stainless steel cap.
pressure gauge 4 นิ้ว ราคา of the WIKA POLARgauge� series
Note
You can get more info on the POLARgauge� series on the WIKA website via the following links. The product family currently comprises four instrument types: The Bourdon tube pressure gauge model PG23LT, the differential pressure gauge models 733.51, 733.31 (filled versions of the models 732.51, 732.31), the bimetal thermometer model 55 and the gas-actuated thermometer model 73. Thus, a suitable variant is available for every application. Would you like to buy differential pressure gauge models? In our WIKA online-shop you will discover a few of our standard designs. When you have any further questions, your contact will gladly assist you to.