Tsurumi’s small dewatering pump, the LB series, is designed for applications where area is tight, particularly development. Secured by เกจวัดแรงดันอากาศ or chain, an LB can be utilized in applications which involve slim pipes, small tanks, deep pits and in distant areas which are difficult to succeed in with bigger equipment. The LB model has a fully symmetrical design with no protruding elements, allowing it to be lowered to unknown depths with none threat of snagging. With a diameter of only 187 mm, the pump’s round cross-section even matches into smaller filter pipes. There can additionally be a model with a water degree sensor which is just some millimetres longer. The pump then controls itself automatically, switching on or off depending on the water degree. The LB presses water with dirt particles as a lot as 6 mm in measurement via the housing, allowing optimal cooling of the motor. The models within the sequence pump 225–440 l/minute and to a most of 17.5 m. The smallest mannequin weighs round 10 kg dry, the most important around 30 kg.
Share