Measuring instruments for pressure and temperature are employed in almost all regions of industrial manufacturing. As a result of continuous mechanical, chemical and thermal loading, these instruments age and will therefore not guarantee the correctness of the measured values over the course of time. Through timely calibration, however, the alteration of the measured value can be determined.
In the process of calibration, the displayed value of the measuring instrument is weighed against the measuring result of a different measuring device which is recognized to function correctly and accurately and which itself has been made to coincide directly or indirectly with a national (or international) reference instrument. In short, to compare measuring results, they need to be ?traceable? to a national or international standard with a chain of comparative measurements. The calibration hierarchy shown in the picture (using the exemplory case of Germany) depicts the traceability of an inspection equipment in an organization up to national standard at the PTB (German national metrology institute).
To be able to ensure traceability used, the following points should be observed, amongst others:
The chain of comparison should not be interrupted.
The measurement uncertainty must be known in each stage of the calibration chain in order that the total measurement uncertainty can be calculated. As Teetering , a superordinate measuring instrument must have a measurement accuracy 3 to 4 times higher.
Each part of the calibration chain should be documented, like the measurement results.
All bodies carrying out a stage in the chain must prove their competence by means of accreditation.
Calibrations should be repeated at appropriate intervals. The periods depend on the demanded measurement accuracy and the technical requirements
Note
The WIKA calibration laboratory is accredited by the German Accreditation Body (Deutsche Akkreditierungsstelle ? DAkkS) relative to DIN EN ISO / IEC 17025 for the measurands temperature, pressure, DC current, DC voltage and DC resistance. Further information on our calibration laboratory or an on-site calibration with the WIKA calibration van are available on the WIKA website. If you are thinking about our services, please feel absolve to e mail us via e-mail.
Learn more about the differences between factory calibration and traceable calibration in the next video: